Casing Running Tools (CRT)
CB018 – CDS Mud Saver Valve Spring Pin Replacement and Field Repair
CB026 – Revision of 7″ ICDS Mandrel Load Capacity to 400 ton
CB036 – Color Coding Service Loop Hoses for CDS
CB038 – Use O-Ring as Substitute for Retraction Band on 4-1/2″ and 5-1/2″ ICDS
SB009 – ALERT – Lifting Nubbin Rating
SB010 – ALERT – CDS System Modifications
SB016 – ALERT – External CDS Slip Recall
SB018 – ALERT – Breakout Vise Recall
SB019 – ALERT – Application of Warning to CDS Single Joint Elevator Links
SB024 – ALERT – Torsion Latch Spring Upgrade, Single Joint Casing Elevator
SB025 – ALERT – Engagement Marking of CDS
SB026 – ALERT – Release Trapped Pressure
SB027 – ALERT – Casing Drive Spearhead Spearhead Procedures
SB033 – ALERT – Hydraulic Cylinder Overpressure Hazard, Break Out Vise
SB036 – ALERT – Torque Limiting Mechanism Addition to CDS Link Tilt Assembly
SB053 – ALERT – Internal Casing Drive System (ICDS) 4-1/2” and 5-1/2”
SB054 – ALERT – CDS Anti-Rotation Bracket (ARB)
SB055 – ALERT – Casing Drive System Control Panel Lever Operation
SB084 – ALERT – Check Valve Orientation in CDS Close Confirm Systems
SB094 – ALERT – Dropped Casing Incident
SB099 – ALERT – Accidental Overload on Elevator Links
TB017 – CDS Mudsaver Auto-Close Valve
TB027 – CDS Actuator Upgrade – Casing Drilling and Running Applications
TB034 – Segment Sequencing for Slip Die Assembly, Push/Pull Machine
TB038 – CDS Axial Compression Capacity
TB039 – CDS Mandrel Adapter/Spear Head 12.6 to 15.1 lb/ft Outside Diam. Reduction
TB042 – 6 Ton Single Joint Elevator Load Latch Inspection and Repair
TB052 – Importance of Internal CDS Grapple Inspection
TB055 – 4-1/2” & 5-1/2”Internal CDS Grapple Design and Manuf. Improvements
TB060 – CDS Link Tilt Cylinders – Installation and Maintenance
TB066 – CDS HPU Lift Kit and CDS HPU
TB074 – Mark 2 (MK2) Die Sets Available for TESCO’s External Casing Drive Systems
TB098 – TESCO Supports DROPS Initiative; Replaces Diaper Pins with Cotter Pins
TB100 – TESCO Top Drives and CDS Nameplates Incorrectly Engraved with API Spec 8C
TB103 – CDS CE/ATEX Certification
TB107 – Usage Instructions for Tesco’s First Generation External Casing Drive Die Sets
TB110 – CDS Interlock System Upgrade with Close-Confirm Switch
TB112 – Review of Weld Size on CDS Link Pivot Blocks
TB122 – Proper Precautionary Procedures Prior to Performing Welds
CDS-001 – CDS Integration Pressure Reducing Manifold
CDS-002 – CDS Link Tilt Speed Control
CDS-003 – ICDS and Mk3 Actuator Technical Specifications
CDS-004 – 17-7/8″ to 20″ ICDS Grapple Retention Retrofit Solution
CDS-005 – Maximum Load – Single Joint Elevators
CDS-006 – ECDS Technical Specifications
CDS-006 – ECDS Technical Specifications
CDS-007 – CCDS Technical Specifications
CDS-008 – ALERT – ICDS Grapple Retention Retrofit Solution – 12-3/4″ to 16-3/4″
CDS-009 – ALERT – ICDS Grapple Retention Retrofit Solution – 7″ to 9-5/8″
CDS-010 – ALERT – ICDS Grapple Retention Retrofit Solution – 9-5/8″ to 13-3/8″
CDS-011 – ALERT – Link Tilt Operations with Stabilizer Kit and Coupler Plate Mount